Patrick Flanigan signiture products.

We apoligize to our international customers but we can only fill orders that will be shipped to a United States address.

  Patrick Flanigan Signature Xtreme Flight Proof Gun Case

FE111 $169.99 ($28.00 s&h)

This is the Patrick Flanigan Flight Proof Signature Gun Case. This case is capable of holding two of your favorite shotguns in break down form.

Low Profile Wheels: Sleek low profile wheels for ultimate portability.

Ball Corners: Durable chrome ball corners with a 3 prong six rivet industrial anchor designed to provide protection against the rigors of heavy travel.

Rubber Feet: Industrial grade rubber feet attached with heavy duty bolts and t-nuts so your case doesn’t experience to much travel rash.

Spring Loaded handles: Recessed chrome and spring loaded. These handles flex to a comfortable 90 degree angle for an easy pull on heavy loads. Retractable so they never become an in the way issue for you or that unforgiving baggage handler.

Industrial hinges: Super secure hinge with constant and even secure latching.

Industrial rivets: Double anchor industrial rivets to secure all hardware for maximum durability.

Tongue & Groove fit: Tongue and groove construction for a heavy duty locking fit. Sealed tight to keep
travel grunge out.

Case Construction: Structurally rugged, strong & built to resist the punishment of travel.

Industrial latches with adjacent padlock holes: Recessed chrome bi- position butterfly latches. Industrial grade with ten rivet anchor construction.

 

  GLO•DOT XTREME UNIVERSAL
$19.95 ($3.00 s&h) - TG90X

Here is my custom gun sight called the "Glo Dot Extreme Universal". This sight will help you to locate your target faster then ever before. This is the same sight I use when setting new world records.

* Fits all ventilated rib shotguns.
* Extremely low profile.
* Easy magnetic installation.
* Includes multiple interchangeable fibers in different colors.
* Includes 4 different sized mounting bases.
* Includes carrying case.
* Fiber diameter is .060".
* Endorsed by Patrick Flanigan, Professional Exhibition Shooter and World Record Holder.

 

  XTREME SIGNATURE DUCK CALL
$49.95 ($2.00 s&h) - DJSS66

Hello everyone, it's Patrick Flanigan Xtreme Sport Shooter.

When I'm not out breaking world records or performing my live Xtreme sports shows, you'll find me out calling in the green heads. It's true, I'm a bird-hunting monster... and when I hit the marsh or the field in search of the flight, you can guarantee I'll be packing all the right tools!

This is my checklist: Winchester SX3, Winchester Xtended Range Ammo, water, dog snacks, decoys, mountain dew and the item that never leaves my neck.. my Patrick Flanigan Xtreme Duck Call by DJ Calls.

I use DJ Calls because I am a fan of the rich, warm tone their mallard calls produce. The all-natural wood call gives me the confidence I am looking for when I need to depend on quality and sound. I am not a great duck caller; however the Patrick Flanigan Xtreme Duck Call sounds so good, you might just think I know what I'm doing!

Whether you want quality that comes natural or you're just looking for a great sounding duck call, go Xtreme with the Patrick Flanigan Xtreme Duck Call by DJ Calls.

 

  Patrick Flanigan's Xtreme Magazine Extension
6 shot model $129.99 ($9.95 s&h) - extension001

6-Shot Stainless Steel Extension Tube with an overall length of 16-1/2". Includes a mounting collar, stainless steel spring, red shell follower, black spring retainer and barrel clamp with sling loop.  This extension will allow your SX2 or SX3 the capabilities of eleven rounds.

WARNING: UNLOAD WEAPON BEFORE ATTEMPTING TO INSTALL ANY
COMPONENT!!!

1. Remove the magazine cap from the magazine tube.
2. Remove the magazine spring retainer by gently depressing the plastic tab and carefully
pry it out with a flat screwdriver. Note: The magazine spring is under tensions. USE
CAUTION WHEN REMOVING THE RETAINER.
3. Remove the factory magazine spring, follower, and 3 shot plug from the tube.
4. Thoroughly clean the interior of the magazine tube and LIGHTLY coat it with any
lubricant.
5. Slide one of the followers into the factory tube with the solid end facing the receiver.
6. Slide the other follower into the extension tube with the solid end facing away from the
threaded end of the tube. Insert one end of the new magazine spring into the extension
tube and the other end into the factory tube.
7. While guiding the spring into both tubes, carefully thread the collar of the extension tube
onto the factory tube. You will have to guide the spring coils into the tube until the
retainer contacts it. Thread the collar partially onto the magazine tube, but not touching
the forearm. While holding the collar, unscrew the extension tube one full turn. Tighten
the collar to seat the forend and barrel to the receiver. Now screw the extension tube
into the collar until it contacts the factory magazine tube. DO NOT USE A WRENCH
FOR THIS OPERATION. HAND TIGHTENING THE EXTENSION TUBE INTO THE
COLLAR IS SUFFICIENT.
8. Remove the locknut from the barrel clamp assembly. Fit the barrel clamp with the
smaller radius side on the barrel and located approximately three inches from the end of
the extension tube. Mate the other half of the clamp to it and tighten the locknut.

 
 
 



 
Copyright © 2008 Patrick Flanigan